Equipment
In-house machines
Bringing designs from the computer into the real world is a multistep process. Our facility is well equipped to get the job done, fast.
FormUp 350 Fleet
Three AddUp FormUp 350 printers, twelve lasers total, print fine detail with less support material than blade or brush machines.
Machine
DMG Mori DMU 40 Pro
5-axis CNC machining cuts threads, precision bores, and tight tolerance features on printed parts.
Post-Process
Wire EDM
Wire EDM removes parts from the build plate without bending or marring delicate geometry.
Post-Process
Addiblast MARS01 Depowder
The Addiblast MARS01 station clears leftover powder from internal channels and lattices after printing.
Post-Process
Argon Furnace
Our argon atmosphere furnace runs stress relief and heat treatment cycles up to 1000 degrees Celsius.
Post-Process
Laser Marking
A laser marker etches permanent serial numbers and logos directly into finished parts.
Post-Process
Ultrasonic Cleaning
A four stage ultrasonic line cleans and passivates parts to ASTM F86 medical standards.
Inspect
CMM
Our coordinate measuring machine verifies critical dimensions against the part model with a touch probe.
Inspect
Oxygen Analyzer
An oxygen analyzer tests material from every print to confirm it stays within spec.
Inspect
Keyence IM-X1000
The Keyence IM-X1000 captures dozens of part dimensions automatically from a single image.
Inspect
Keyence VL-800
The Keyence VL-800 scanner captures a part's full surface and compares it to CAD.
Inspect
Keyence VR-6000
The Keyence VR-6000 profilometer measures surface texture and fine form without touching the part.
Quality
The machines are half the story
Every build is monitored, tested, and traced. See how we prove each part meets spec before it ships.